Model Aircraft Wall Hanger
This beautifully designed 3D Printed Model Aircraft Wall Holder is the perfect way of displaying your aircraft in an artistic yet space-saving way! If you are running out of room to display your models in your model room then this holder is the ideal solution.
Our Model Aircraft Wall Holder is the first of its kind available that has been custom designed for display and space-saving purposes. It takes only moments to assemble. The hardest part is drilling your walls!
Aesthetics have played an influential role in the design of the wall holder. This is why we have designed it to be compact and stylish. We also included caps to hide the wall fixing screws. The holder is only available in White to help it blend into the modern décor in a more pleasing way. Once the aircraft is fixed in place most of the holder is concealed so the focus remains on your hard work.
How does it work?
Simple! The two arms/hooks are fixed to the base plate using the supplied screws and washers. Once this is complete, simply attach the supplied foam strips to the arms/hooks to protect your aircraft from any damage from the plastic of the holder.
Next, take a Level and your Drill, mark the location of the screw holes and install adequate wall fixings for your property.
* Please Note - We do not supply wall fixings as every home is different. Care should be taken to ensure you have a sturdy anchor point in your wall.
DO NOT use M3 Tape or sticky fixings to attach the holder to your wall.
Once you have your holder firmly attached to your wall, insert the screw caps supplied to hide the fixing points.
Now you can take your aircraft and position the arms to suit. We recommend hanging the aircraft by the Tail Stabilizers as shown below:
Check to make sure your aircraft is fully supported in the arms and adjust as needed!
DISCLAIMER - We are not responsible for any damage caused to your model. Please ensure that the holder is correctly anchored to the wall and your aircraft is secure. Do not add any excessive strain to the holder or mount it in direct sunlight as this will cause damage to the plastic and your aircraft. By purchasing this holder you accept full responsibility for the points outlined.
Max Arm Spread: 16cm
Min Arm Spread: 5cm
Range of Adjustment: 70°
Max Supported Weight: 2kg
- 1 x Backing plate.
- 2 x Screw Caps
- 2 x 50mm Screws (To fix arms)
- 4 x M5 washers
- Foam Strips (For arm padding)
What is our holder made from?
This Holder is 3D printed in High-Quality PLA plastic. We spent many hours testing lots of different brands of filaments to make sure it met our high-quality standards and that the final product reflects this quality.
Order Process, Print & Delivery Times
We aim to get your orders printed, packed & shipped within 3 days.
During peak demand it could take a day or 2 longer. If we were faced with any major delays, we would inform you of this ASAP.
Notice: Due to the nature of 3D printing the finished product may have some defects in the finished surface. We quality check every item we produce to make sure it reaches you in the finest possible condition. If your item arrives damaged please do not hesitate to get in contact with us ASAP. This will enable us to investigate the situation and talk to the shipping company to resolve any problems.